RAM 16GB Upgrade Troubleshooting

RAM 16GB Upgrade Troubleshooting I installed a 1TB SSD HB 2.5" and it worked like a charm. Then I installed the 16 GB RAM upgrade and nothing. No beeps, no chime, just a black screen and the fan might be running, hard to tell.
Asked by: Guest \| Views: 162

Total answers/comments: 3

Comments display order:

mcgyver89 [Entry]

"gadgetpro

@gadgetpro

Rep: 49

1"

mcgyver89 [Entry]

"Double check to make sure that your new RAM is the correct speed for your computer. Your Mac uses PC3-8500 RAM. You may have bought faster, newer RAM, such as PC3-12800. This RAM is technically backwards compatible with your computer, but it forces the bus to run at the faster speed, which it can't do. I'm having trouble finding the Apple support article about this, but it works like this: The bus can only run at the 1067 MHz speed of the RAM it was designed for. The computer will only run at the speed of the slowest RAM module installed. If you have PC3-8500 RAM in both slots, that's great, that's what the computer was designed for. But if you put PC3-12800 RAM in both of the slots, the bus will try to run at the speed of that faster RAM, which it can't do. With one slow RAM module in one slot, and one fast one in the other slot, the bus will run at the speed of the slower one, which it's supposed to, and then slow down the faster RAM so that it can also work (this is currently how I'm running my 2009 white MacBook).

Pretty sure it should give off some warnings though, so it's weird that it's not."

mcgyver89 [Entry]

"RAM from the ifixit upgrade kit has the following label:

8GB, DDR3, PC3-8500, 1066MHz, 200 PIN

The computer is running better and faster with 10 GB, but since I bought the kit (ifixit didn't have individual 8 GB RAM in stock) I doubt they will let me return just one of them if I can't get them both to work together."