Printer says it needs repair

"oscarsmom222 that will depend on where you are located. A Canon autorized service center should pop up by using your favorite online search engine.

I'd try so simple things first. Like this one from Canon:

1. Open the cover of the printer.

2. Remove all ink tanks from the printer.

3. Lift up the gray locking lever on the side of the ink tank holder.

4. Gently remove the print head from the carriage unit.

5. Place the print head back in and lock the lever down.

6. Place all of the ink tanks back in the printer.

7. Close the cover and turn the printer off.

8. Unplug the power from the printer. Leave the power unplugged for about 5-10 minutes.

9. Plug the power back in and turn the printer on.

Check on here for a few more ideas."