After replaced screen, screen goes black during a call. Sugges

The issue is often looked over by repair shops or people repairing their own G2. There is a black rubber gasket that goes over the proximity sensor. If this is left off, then your screen will go black and stay black until the phone call is over. The reason I know, is because Ive had this issue before and I realized I left the black rubber gasket in the old frame. Once I transferred it to the new frame, the proximity sensor worked properly.

"Hi

Even i had this issue after changing the screen when i went to service centre they told we need to change the Proximity sensor for 2200 Rs to which i was not happy at all..so i asked them to remove the proximity sensor which costed me 200 service charge..after that it was working fine."

"i was en counting the same problem with my g2 i search all over the internet but i could find an solution,then i decided to try on my own,this what i did to disable the proxy sensor

1 open the back cover of your phone

2 locate the proxy sensor plug , is on the right from the front camera when the phone is facing down

3 remove the whole sensor and hold it and make sure is upright the plug must face down

4 there are two little sensor on left and right, break the sensor which is on your left with a side cutter make sure you dont destroy the other sensor or the circuit board

5 put everything together an problem solved,no more blank screen,no more screen shut off when unlocking on the dark"

Guys is it because of the screen protector ? I use a glass protector on my g2 and the screen goes off when in call.

push down on the top of the phone during a call by the speaker grill. if the screen comes back on the prox sensor is turning on most likley due to the screen being a little unseated,you may have to reinstall it