iPad Pro Power Issues After Screen Replacement

iPad Pro Power Issues After Screen Replacement

I have an iPad Pro 9.7 that a customer brought in with a broken LCD/Digitizer. The tablet still worked from what we remember. We disassembled the tablet and removed the broken LCD/Digitizer. Of course, we put a guitar pick in-between the battery and the motherboard as we normally do before disconnecting the old screen and connecting the new LCD/Digitizer (got part from Mobile Defenders). The new LCD/Digitizer works perfect so we transferred the home button and sealed back up the tablet. We tested it shortly, but apparently did not catch the fact that the battery is now having issues.

Asked by: Guest | Views: 255

Total answers/comments: 2

Comments display order:

Guest [Entry]

"If you’re confident the replacement battery works, then I would test the charge port by checking continuity between the Lightning port and the board…you have to make sure the signal/line is complete all the way through. ZXW will help you here as the board is fully mapped out.

If the charge port looks good, then consider replacing Tristar."

Guest [Entry]

Battery connector is broken and needs to be changed. These iPads turning them off is sufficient ent rather than trying to stick something in the battery to disconnect. I did the same mistake and broke the connector. And normally when that happens the iPad will try to charge but it won’t charge correctly because the pins are not in the right place and they have moved out of place.