Build pc from scratch for first time

Build pc from scratch for first time

I just built a pc for the first time and am trying to power it on. Everything was connected properly I checked like 5 times. When I start it up the system and cpu fan spin, harddrive spins when it start up, but there is not display. I am not getting anything on the screen. No bios screen or anything else. I took out the ram memory to see if it starts beeping but it does the same exact thing. Can any one help me? I would appreciate it very much. Thanks.

Asked by: Guest | Views: 224

Total answers/comments: 1

Comments display order:

Guest [Entry]

"If there is no beeping, are you sure the PC speaker is connected? My new mobo had a tiny little speaker that looked like a little cylinder on the end of two short wires with a two pin connector at the other end - I didn't even recognize it as a speaker. My old mobo had the speaker soldered directly on, so I was not expecting a detachable speaker on the new one.

Also, you might want to connect the display to the mobo video port and strip it down to just PSU and CPU and see if you can get into the BIOS setup."