bios beeps codes [duplicate]

bios beeps codes [duplicate] I have a computer with a GF7050V-se mainboard but i get some beeps. There are 2 short beeps and 8-9-10 long beeps. Does anyone know what those beeps means?
Asked by: Guest \| Views: 201

Total answers/comments: 2

Comments display order:

Guest [Entry]

"Boot Block Beep Codes

Nbr of Beeps / Description

1 / No media present. (Insert diskette inf loppy drive A:)

2 / “AMIBOOT.ROM” f ile not f ound in root directory of diskette in A:

3 / Insert next diskette if multiple diskettes are usedf or recovery

4 / Flash Programming successful

5 / File read error

7 / No Flash EPROM detected

10 / Flash Erase error

11 / Flash Program error

12 / “AMIBOOT.ROM” f ile size error

13 / BIOS ROM image mismatch (file layout does not match image present inf lash device)

POST BIOS Beep Codes

Number of Beeps /Description

1 / Memory ref resh timer error

3 / Base memory read/write test error

6 / Key board controller BAT command failed

7 / General exception error (processor exception interrupt error)

8 / Display memory error (system video adapter)

Troubleshooting POST BIOS Beep Codes

Number of Beeps / Troubleshooting Action

1, 3 / Reseat the memory, or replace with known good modules.

6, 7 / Fatal error indicating a serious problem with the system. Consult y our system manufacturer. Bef ore declaring the motherboard beyond all hope, eliminate the possibility of interf erence by a malf unctioning add-in card. Remov e all expansion cards except thev ideo adapter. • If beep codes are generated when all other expansion cards are absent, consult y our system manufacturer’s technical support. • If beep codes are not generated when all other expansion cards are absent, one of the add-in cards is causing the malf unction. Insert the cards back into the system one at a time until the problem happens again. This will rev eal the malf unctioning card.

8 / If the system video adapter is an add-in card, replace or reseat the video adapter. If thev ideo adapter is an integrated part of the sy stem board, the board may be faulty.

source : your motherboard manual"

Guest [Entry]

"In my experience, 99% of the time beep codes mean CPU or Memory.

The first thing I would always you do is to reseat the memory, if no change, take out all pci / addon cards, then try again. If still nothing, check the CPU is ok."