Hola Alberto, efectivamente pude repararla sin ningun problema. Te recomiendo que lo hagas, es muy sencillo, no mas de 10 minutos demoré en reemplazar el ccd. Exitos
alberto, try this " To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter."from here. If you are absolutely sure that your shutter is working, you should replace your CCD and check the cables for proper placement and that they are not frayed or broken. the service manual is available for you right here Hope this helps. Good Luck
Alberto pudiste reemplazar el CCD? Tengo una Panasonic Lumix DMC-TZ3 con el mismo problema. Posiblemente compre el repuesto en e-bay pero no tengo referencias si es fiable.
Supongo que la respuesta es "obsolescencia programada". Los estándares de calidad con que fabrican los repuestos de tecnología discontinuada no es la misma.
