As we all know, the drying machine is one of the most useful equipment in flotation separating process. Now Hongxing experts will tell you some common faults and their solutions of drying machine.
This breakdown can be said as the most complex breakdown. There are four reasons will result in the occurrence of this phenomenon. First is that the specification of the dryer cannot meet the requirement.
This situation usually occurs because the heat preservation of the dryer is not good enough. At this time, we can increase the heat insulating material to improve the heat preservation. This from happening, of course, may also be a design problem, so we must be careful in selecting the drying equipment.
The final products cannot meet the drying requirements through once drying. This phenomenon mainly caused by the following situations. First is the dryer is too small, the second is the incorrect use of the dryer, the third is the calculation of air pressure and flow is wrong. It is better to change the dryer specification according to the actual situation.
If you want to get more information, please contact Hongxing Company or visit Hongxing Company directly.
The third is that the raw material cannot be taken away, causing the fire in the dryer. Here it is time to check whether the installation of the dryer is correct or not, whether it is in gas leak or need to increase the air pressure. The fourth is the improper use of the dryer. At this time it is necessary to learn the correct operation way of the dryer following the manual of the dryer.
- drying equipment: http://www.hx-crusher.com/n247.html
- indirect heat drier: http://www.hxjq-mill.com/news/dry_mining_equipment.html
- vibration sieve: http://www.hx-crusher.com/n260.html
