Home » Articles » Technology

Basic structure and fault prevention of rotary dryer

In your whole life especially when you are young, you must be dying to know which is the most suitable dryer when you want to start a mining business. Because a reasonable selection of drying plant can save investment, reduce running cost to ensure product quality, get the maximum economic benefit. The ideal selection must be according to user's conditions and material's factor, having the stress to find the most suitable model for you materials.

Coal slime dryer equipment mainly consists of draft fan, scattered, belt device feeder, feeding machine, rotary roller, heat source, belt discharging machine, unloaded feeder and distribution ark to form.The work area consists of guide material area, lift up the stripper plate area, the material discharging area and clean up area.

The refractories is the key factor to extend the service life, the use length of refractories directly affect the rotary dryer's availability.If frequently stop refractory kiln lining, it not only increased overhaul strength, but also affect its normal operation, increasing manufacturing cost, bringing huge economic losses. The service life of the refractory materials mainly depends on the operation status, the corresponding process, as well as refractory material selection, the right building method. Properly laying refractory materials will be the key to the service life, not only be helpful to prolong service life, still can eliminate this should lead to premature damage to some of the stress; The wrong laying method can greatly shorten the refractory materials using life.

Wet coal is already low moisture loose state and don't have the binding phenomenon in this area. After heat transfer, coal slime reach the demand water moisture, then goes to the next material area. Wet coal slime in cleaning area is copy plate start to copy form curtain material condition.Material falls easily formed wall binding phenomenon. In the cleaning up area, for mechanical design having cleaning device, cleaning device reasonably cleans material adhesion on the wall. In the process, cleaning device also plays materials group ball agglomerate crushing effect, which increases the heat transfer area, improves drying rate

In the construction site inspection, we often find the anchor is not firmly welded, sometimes even appear off phenomenon with a feet touch, if that is not handled in time, it will appear that large area pouring materials chunks in the production. It can cause accidents. In the process of daily work, we should be strictly to the rotary dryer reviews, solve the problems in time, increase production efficiency, bring benefit to the company, as well as increase safety insurance.

Henan Hongxing Mining Machinery Co., Ltd has many years' of technological power and experience accumulation of manufacturing and management of portable crusher, calcining kiln which have many advantages such as simple and reasonable structure, high independent impact crushing ability, super low operational cost and the most competitive price. These machines have the most competitive price and the most reliable quality so that they are the top choice for the high performance crushing equipment. - https://www.affordablecebu.com/
 

Please support us in writing articles like this by sharing this post

Share this post to your Facebook, Twitter, Blog, or any social media site. In this way, we will be motivated to write articles you like.

--- NOTICE ---
If you want to use this article or any of the content of this website, please credit our website (www.affordablecebu.com) and mention the source link (URL) of the content, images, videos or other media of our website.

"Basic structure and fault prevention of rotary dryer" was written by Mary under the Technology category. It has been read 1724 times and generated 0 comments. The article was created on and updated on 28 November 2012.
Total comments : 0